SVP HDT-02, User Manual

Page: 129 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 129
6.2.1.6 Scrambler
If you want an encryption system, it can be chosen here.
• None:
None encryption
• BISS-1:
Uses an unencrypted key for the BISS key
• BISS-E:
Uses an encrypted key
(AES 148 and AES 256 encryption, optionally, are available)
6.2.1.7 Remux
• Mode (eligible parameter):
Here you can enable or disable the Remux mode. When the enable
mode is selected, Transport Stream Bitrate mode is always manual so
that the user can configure the output bitrate of the TS from the
internal NTT encoder. You must configure it considering that the ASI
input Bit rate plus the NTT encoder Bit rate must be minor than
modulator total Bit rate.
• Program Number (editable parameter):
Here you must configure the program number of the service you are
introducing by the ASI input signal.
• PMT PID (editable parameter):
Here you must configure the program map table packet identifier of
the service you are introducing by the ASI input signal.