SVP HDT-02 User Manual Download

Page: 53 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

Profile

(eligible parameter)

In this field, the codification profile can be configured. To select the
desired profile, press Right, Left arrows buttons.

The available options are:

•

4.2.0

•

4.2.2 ( not available in 1080p-50/59.94/60 Hz video formats)

GOP

(eligible parameter)

In this field, the group of figures parameter is displayed. It specifies

the order in which

intra

and

inter-frames

are arranged.

The available options are:

•

Auto

•

Manual (editable parameter)

Level:

In this field, the level of the H.264 encoder can be configured. The
available options are:

•

4.0

•

4.1

•

4.2 (only available

in 1080p-50/59.94/60 Hz video formats)

Table 4.7: SDI Input menu options

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands