SVP HDT-02, User Manual

Page: 119 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 119
Chapter 6: Web Server
6.1 Introduction
This equipment can be controlled from a PC connected at the rear panel
Ethernet connector
.
To enable the browser interface correctly, the IP address, Subnet Mask,
Gateway, User Password and Administrator Password need to be set correctly
on this unit. Next, the steps to setup network parameters are shown:
1. Go to Unit -> Remote
Figure 6.1: Web Server screen
2. Select LOC option and set a local IP address. To change the IP address
first press the OK button and then, with the Up, Down keys select the
desired number. To change from one character to another, press
Right, Left keys. Press the OK button to save the introduced value.
Figure 6.2: Local IP