SVP HDT-02, User Manual

Page: 116 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 116
5.2 Main Screen
Next the value of the data field which appears on the main screen of the HDT-
02 Transmitter is explained.
Figure 5.2: Main screen
The data status field indicates with a darkened X that it is disabled. When this
parameter is enabled and blinks, this means that there is nothing connected
to the data input. When this field alternates the value between
‘g’ and ‘G’, it
means that it is trying to get the GPS satellites. If the ‘G’ does not vary, then
it is connected to the satellites (at least 6 satellites).
5.3 GPS Transmitter Screen
When an external GPS receiver is connected, to access the GPS screen, go to
the encoder option in the menu. Once inside this option, go to the Data field
and choose GPS External. Press the OK button and then the GPS screen
appears.
When the internal GPS receiver is being used, to access the GPS screen, go
to the encoder option in the menu. Once inside this option, go to the Data
field and choose GPS Internal. Go to GPS info and press the OK button.
The format of the GPS coordinates used is decimal minutes as shown in the
next example:
N43º02.032’
W023º03.023’