SVP HDT-02, User Manual

Page: 32 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 32
4.1.2 Main Screen for the DVB-T
In the table below, the function of each parameter is explained. These
values are numbered in the order they appear on the main screen.
Figure 4.3: Main screen for DVB-T standard
Parameter nº Function
1 Transmission frequency (MHz)
2 Transmission standard (DVB-T)
3 Output power (dBm)
4 Quantity of reflected power (0-99%)
5 Bandwidth (5, 6, 7, 8 MHz)
6 Modulation (QPSK, 16QAM, 64QAM)
7 LDPC FEC (1/2, 2/3, 3/4, 5/6, 7/8)
8 Guard Interval (1/4, 1/8, 1/16, 1/32)
9 Transmitted bitrate (Mbps)
10
Character 1:
Video input selection (SDI, HDMI, CVBS, DVB-ASI Transport
Stream or Generator) and (static -> presence / blinking ->
absence)
11
Characters 2 (Audio 1) and 3 (Audio 2):
Audio inputs selection (Embedded, Analogue, AES/EBU, Tone
Generator or None) and (Audio 1 and 2 not darkened -> enabled /
darkened -> disabled)
12
Character 4:
Data input selection (None, GPS or RS232) and (not darkened ->
enabled / darkened -> disabled) and (static -> presence / blinking
-> absence)