HDT-02_H.264
High Definition Digital Camera Transmitter
MANUAL V9.9
149
8.2.1
Power supply
The equipment is powered by a DC source from 8 to 36 V. If the input voltage
of the equipment is out of that range, the LED of the equipment blinks GREEN
and RED showing an alarm.
The power source of the HDT-02 should be the same as the one used
for the PA. Both should be turned on and off simultaneously. They must
use the same breaker.
The DC power supply is connected to the equipment via a 4 pin Lemo 1B
connector.
Power supply connection technical features
Item
Features
Connector label
8-36V D.C.
Connector type
4 pin Lemo 1B
Part number (HDT-02)
ECG.1B.304
Part number (cable connector)
FGG.1B.304.CLAD52
Input voltage range
8-36 V.
Consumption
20 Watt.
Table 8.1: Power supply connection technical features
Pinout
Figure 8.2: Connector pinout
Pin
Description
1
GND
2
GND
3
+ VCC
4
+ VCC
Table 8.2: Power supply connector pinout
Summary of Contents for HDT-02
