SVP HDT-02, User Manual

Page: 39 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 39
4.3 Front panel
The HDT-02 camera Transmitter is configured following the menus structure
on the display. The front panel has 8 buttons to enter and exit the
equipment’s control menus and submenus and to navigate through them. The
function of each button is detailed in the following sections.
Figure 4.7: HDT-02 front panel
4.3.1 ON/OFF Button
To switch the equipment on and off, press this button. When the equipment
is turned on, it will display the main screen.
If the power fails while the equipment is operating, it will restart automatically
when the power returns, not being necessary to press the on/off button again.
Figure 4.8: ON/OFF button
4.3.2 OK Button
This button is used to:
• Enter to submenus and change parameters. To access to a submenu,
OK button must be pressed. Moreover, in the fields where the enter
symbol appears, by pressing the OK button the user can change the
value of the selected parameter. To save the introduced value, the OK
button must be pressed.
• When the main screen, pressing the OK button the user can access to
the alarms screen where the different alarms that are taking place are.
To return to the main screen, the cross button must be pressed.
Figure 4.9: OK button