SVP HDT-02 User Manual Download

Page: 212 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

212

Annex D:

GPS-01 Receiver

D.1

Description

Our GPS receiver is a compact and easy solution to know where the

Transmitter is located.
It has a direct connection to the

Transmitter

which sends this GPS information

to the receiver to track the Transmitter automatically.
The

Transmitter

is responsible for the power supply of the GPS. Also,

it’s

the

Transmitter

which is in charge of receiving the data information from the GPS.

The connection is via Lemo 6 pin connector.
The speed of the output data in the

GPS receiver

is 4800 bauds. When the

GPS receiver is connected, the

Transmitter

automatically detects the position

if the GPS-01 receives signal from enough satellites.

Figure D.1: GPS antenna

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands