1D-6 Power Unit Mechanical:
10) Disconnect lead wire connector from rectifier/
regulator (13).
Disconnect the white charge output lead wire
connector (14).
11) Disconnect the trim sensor lead wire connector (15)
and PTT motor cable connector (16).
12) Remove the three bolts (17) securing electric parts
holder to cylinder block.
13) To remove the electric parts holder, refer to following:
a) Remove the nut (18), positive (+) battery cable
(19) and positive lead wire (20) from magnetic
switch (21) of starter motor.
b) Disconnect the red lead wire (22) from magnetic
switch “S” terminal.
c) Remove the bolt (23) securing negative (–)
battery cable (24).
Pull battery cable out of electric parts holder.
d) Cut the cable tie (25) securing main harness.
13
14
IAJ611140053-01
15
16
IAJ611140054-02
17
17
IAJ611140055-01
17
IAJ611140056-01
20
18
19
21
22
IAJ611140057-01
23
24
IAJ611140058-01
25
IAJ611140059-01
Summary of Contents for GF60A
