3A-18 Right Hand Rotation Unit:
• Install the pinion shim (7) and bearing outer race (8).
• Install the gearcase seal ring (9) into the groove on
the driveshaft bearing housing. Apply suzuki silicone
seal to gearcase and driveshaft bearing housing
surfaces.
: Sealant 99000–31120 (SUZUKI Silicone
Seal (50 g))
• Install complete housing and shift rod guide assembly
on gearcase.
Pinion Nut
• Apply thread lock 1342 to the threads of pinion nut (1)
before threading it onto driveshaft.
: Thread lock cement 99000–32050 (SUZUKI
Thread Lock 1342 (50 g))
• Tighten pinion nut to specified torque.
NOTE
It is recommended the original pinion nut be
used for the purposes of shimming during
repair. A new pinion nut should be used on
final assembly.
Special tool
(A): 09921–29511 (Driveshaft holder)
Tightening torque
Pinion nut (a): 45 N·m (4.5 kgf-m, 32.5 lbf-ft)
7
8
IAJ611310070-01
9
IAJ611310071-01
(A)
IAJ611310072-01
(a)
1
IAJ611310073-01
Summary of Contents for GF60A
