Suzuki GF60A, Service Manual

Page: 125 / 336

Power Unit Mechanical: 1D-23
7) Loosen and remove the bolt (9) securing IN.
camshaft timing sprocket to camshaft.
NOTE
Hold camshaft by placing a wrench on the
hexagon area of the camshaft.
8) Remove timing chain (10), IN. camshaft timing
sprocket (11) and dowel pin (12).
Installation
Installation is reverse order of removal with special
attention to the following steps.
1) Align crankshaft match mark “A” with match mark “B”
on crankcase as shown in figure.
2) Check that match mark “C” on exhaust camshaft
timing sprocket aligns with match mark “D” on
cylinder head as shown in figure.
3) Fit the dowel pin (1) onto IN. camshaft.
Then turn the camshaft to position the dowel pin at
the bottom, as shown in figure.
4) Install timing chain by aligning blue plate “F” of timing
chain and match mark “E” on exhaust camshaft
timing sprocket as shown in figure.
Install timing chain by aligning orange plate “G” of
timing chain and crankshaft match mark “A” as
shown in figure.
9
IAJ611140141-01
10
11
12
IAJ611140142-01
“A”
“B”
IAJ611140143-03
1 “C”
“D”
IAJ611140144-01
“F”
“E”( )
IAJ611140145-01
“A”
“G”
IAJ611140146-03