Suzuki GF60A, Service Manual

Page: 132 / 336

1D-30 Power Unit Mechanical:
4) Install camshaft housing. Tighten housing bolts in 3
steps (1/3 of specification, 2/3 of specification, full
torque specification) in the indicated order.
Tightening torque
Camshaft housing bolt (a): 11 N·m (1.1 kgf-m,
8.0 lbf-ft)
NOTE
Do not rotate camshaft while Plastigauge is
installed.
5) Remove camshaft housing.
6) Using scale on Plastigauge envelope, measure
Plastigauge at its widest point.
Camshaft journal oil clearance
Standard: 0.045 – 0.087 mm (0.0018 – 0.0034 in.)
Service limit: 0.120 mm (0.0047 in.)
If journal oil clearance exceeds the service limit,
measure camshaft journal (outside dia.) and
camshaft housing (inner dia.). Based on
measurements, replace camshaft and/or cylinder
head with camshaft housing.
Camshaft journal outside diameter No. 1 – No. 4
Standard: 22.934 – 22.955 mm (0.9029 – 0.9037
in.)
Camshaft journal (housing) inside diameter No. 1
– No. 4
Standard: 23.000 – 23.021 mm (0.9055 – 0.9063
in.)
Special tool
(B): 09900–20205 (Micrometer (0 – 25 mm))
1. Plastigauge 2. Scale
(a)
“1”
“2”
“3”
“4”
“5”
“6”
“7”
“8”
“9”
“10”
“11”
“12”
“13”
“14”
“15”
“16”
“17”
IAJ611140236-01
1
2
I9J011140075-01
I9J011140200-02
IAJ611140171-01