background image

Tiger 230T

S2507T

User’s Manual

Revision 1.00

Copyright © Tyan Computer Corporation, 2001. All rights reserved. No part of this manual may be repro-
duced or translated without prior written consent from Tyan Computer Corp.

All registered and unregistered trademarks and company names contained in this manual are property of
their respective owners including, but not limited to the following.

Tiger 230T S2507T is a trademark of Tyan Computer Corporation.
Intel, Pentium III DP, Celeron are registered trademarks of Intel Corporation.
VIA, Apollo Pro133T are trademarks of VIA Technologies, Inc.
Promise, FastTrak100, FastBuild are registered trademarks of Promise Technology, Inc.
AwardBIOS is a trademark of Phoenix Software.
Windows is a trademark of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Information contained in this document is furnished by Tyan Computer Corporation and has been
reviewed for accuracy and reliability prior to printing. Tyan assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to sale and/or use of Tyan products including liability or warran-
ties relating to fitness for a particular purpose or merchantability. Tyan retains the right to make changes
to product descriptions and/or specifications at any time, without notice. In no event will Tyan be held lia-
ble for any direct or indirect, incidental or consequential damage, loss of use, loss of data or other malady
resulting from errors or inaccuracies of information contained in this document.

TM

Summary of Contents for S2507T

























































Reviews: