Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 183 / 600

180
3-1. Instrument cluster
warning system.
• “Identifying Each Wheel & Position”
Select to register the ID codes of the
tire pressure sensors to the tire pres-
sure warning system.
• “Setting Unit”
Select to change the units of measure
displayed.
 “Rear Seat Reminder” (

P.193)
Select to enable/disable the rear seat
reminder.
■
Settings
 “Language”
Select to change the language on the
multi-information display.
 “Units”
Select to change the units of measure
displayed.
 “Meter Type”
Select to change the speedometer dis-
play.
 (EV indicator) (

P.84)
Select to enable/disable the EV indica-
tor.
 (Driving information display
settings)
Select to set up the following items.
• “Hybrid System”
Select to enable/disable the ECO
Accelerator Guidance (

P.174).
• “Fuel Economy”
Select to change the display on Fuel
Economy (

P.173).
• “Power Consumption”
Select to change the display on Power
Consumption (

P.173).
 (Audio settings)
Select to enable/disable screen.
 (Vehicle information display
settings)
• “Display Contents”
Select to set up the following items.
“Energy monitor”:
Select to enable/disable the Energy
monitor (

P.182)
AWD:
Select to enable/disable the AWD sys-
tem display (

P.177).
• “Drive Info Type”
Select to change the drive information
type display between trip and total.
(

P.176).
• “Drive Info Items”
Select to set the items on the upper and
lower side of the drive information
screen from three items, average
speed, distance and total time.
 “Closing Display”
Select to set the items displayed when
the power switch is turned off.
 “Pop-Up Display”
Select to enable/disable the following
pop-up displays, which may appear in
some situations.
• Incoming call display of the hands-
free phone system
• Audio operation
• Volume operation
• Voice control
 “Calender”
Select to set up the calender.
This can only be set if GPS calibration
of clock is turned off in the multimedia