Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 522 / 600

519
8
8-2. Steps to take in an emergency
W
hen tr
oubl
e aris
es
of the brake pedal may be shown while
the driving support systems such as
PCS (Pre-Collision system) or the
dynamic radar cruise control with full-
speed range is operating. If a warning
message is shown, be sure to deceler-
ate the vehicle or follow an instruction
shown on the multi-information display.
●
A warning message is shown when
Brake Override System operates.
(

P.263, 514)
●
A warning message is shown when
Drive-Start Control or Parking Support
Brake function (if equipped) operates
(

P.263, 375). Follow the instructions
on the multi-information display.
●
If a message about an operation of
the power switch is shown
An instruction for operation of the power
switch is shown when the incorrect pro-
cedure for starting the hybrid system is
performed or the power switch is oper-
ated incorrectly. Follow the instructions
shown on the multi-information display
to operate the power switch again.
● If a message about a shift lever opera-
tion is shown
To prevent the shift lever from being
operated incorrectly or the vehicle from
moving unexpectedly, a message that
requires shifting the shift lever may be
shown on the multi-information display.
In that case, follow the instruction of the
message and shift the shift lever.
●
If a message or image about an
open/close state of a part or replenish-
ment of a consumable is shown
Confirm the part indicated by the multi-
information display or a warning light,
and then perform the coping method
such as closing the open door or replen-
ishing a consumable.
■
If a message that indicates the
need for visiting a SUZUKI dealer
or a qualified workshop is dis-
played
The system or part shown on the multi-
information display is malfunctioning.
Have the vehicle inspected by a
SUZUKI dealer or a qualified workshop
immediately.
■
If a message that indicates the
need for referring to Owner’s Man-
ual is displayed
●
If the following messages are shown,
follow the instructions, accordingly.
• “Blind Spot Monitor Unavailable”
(

P.350, 518)
• “RCTA Unavailable” (

P.350, 518)
• “Engine Coolant Temp High” (

P.540)
• “Exhaust Filter Full” (

P.391)
●
If the following messages are shown,
there may be a malfunction. Immedi-
ately stop the vehicle in a safe place
and contact a SUZUKI dealer or a
qualified workshop. Continuing to
drive the vehicle may be dangerous.
• “Plug-in charging system malfunction”
• “Hybrid System Malfunction”
• “Check Engine”
• “Charging System Malfunction”
• “Hybrid Battery System Malfunction”
• “Accelerator System Malfunction”
• “Smart Entry & Start System Malfunc-
tion”
●
If the following messages are shown,
there may be a malfunction. Immedi-
ately have the vehicle inspected by a
SUZUKI dealer or a qualified work-
shop.
• “Oil Pressure Low”
• “Braking Power Low”
●
If any of the following messages are
shown on the multi-information dis-
play, the vehicle may have run out of
fuel. Stop the vehicle in a safe place
and, if the fuel level is low, refuel the
vehicle.
• “Hybrid System Stopped”
• “Engine Stopped”
●
If “Maintenance required for DCDC
converter cooling parts See Owner’s