Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 414 / 600

411
6
6-1. Using the air conditioning system and defogger
Interior features
Therefore, the fan may stop for a while
until warm or cool air is ready to flow
immediately after the “AUTO” switch is
pressed.
■ Windshield fog detection function
When automatic mode is set, the humid-
ity sensor detects fog on the windshield
and controls the air conditioning system
to prevent fog.
This feature is used to prevent ice
from building up on the windshield
and wiper blades.
Press the switch to turn the system
on/off.
The indicator comes on when the sys-
tem is on.
The windshield wiper de-icer will auto-
matically turn off after a period of time.
This function automatically controls
the air conditioning airflow so that
priority is given to the front seats.
When the front passenger seat is
not occupied, airflow may switch to
only the driver’s seat. Unnecessary
air conditioning is suppressed, con-
tributing to increased fuel efficiency.
Front seat concentrated airflow
mode operates in the following situ-
ations.
 No passengers are detected in
the rear seats
 The windshield defogger is not
operating
While operating, illuminates.
■
Manually turning front seat
concentrated airflow mode
on/off
In front seat concentrated airflow
mode, directing airflow to the front
seats only and to all seats can be
switched via switch operation.
When the mode has been switched
manually, automatic airflow control
stops operating.
Press the on the air condition-
ing operation panel and switch the
airflow.
 Indicator illuminated: Airflow to
the front seats only
 Indicator off: Airflow to all the
seats
■
Operation of automatic airflow con-
trol
●
In order to maintain a comfortable
interior, airflow may be directed to
Windshield wiper de-icer
WARNING
■
To prevent burns
● Do not touch the glass at lower part
of the windshield or to the side of
the front pillars when the windshield
wiper de-icer is on.
Front seat concentrated air-
flow mode (S-FLOW)