Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 173 / 600

170
3-1. Instrument cluster
changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the sys-
tem may be malfunctioning.
Take your vehicle to a SUZUKI dealer
or a qualified workshop.
●
Displays the outside temperature
within the range of -40°C (-40°F) to
50°C (122°F).
● When the outside temperature is
approximately 3°C (37°F) or lower, the
indicator
will flash for approxi-
mately 10 seconds, then stay on.
■
Liquid crystal display

P.172
■
Customization
Settings (e. g. meter display) can be
changed on the
screen of the multi-
information display. (

P.177)
Switches the items of the odometer,
trip meter A, trip meter B and the
brightness of the instrument cluster
lights by pressing the “ODO TRIP”
switch.
 When the trip meter is displayed,
pressing and holding the switch
will reset the trip meter.
 When the instrument cluster light
control display is displayed,
pressing and holding the switch
will adjust the brightness of the
instrument cluster lights.
WARNING
■ The information display at low
temperatures
Allow the interior of the vehicle to
warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the display moni-
tor may respond slowly, and display
changes may be delayed.
For example, there is a lag between
the driver’s shifting and the new shift
range appearing on the display. This
lag could cause the driver to down-
shift again, causing rapid and exces-
sive engine braking and possibly an
accident resulting in death or injury.
NOTICE
■
To prevent damage to the engine
and its components
●
The engine may be overheating if
“Engine Coolant Temp High Stop in
a Safe Place See Owner’s Manual”
is shown on the multi-information
display. In this case, immediately
stop the vehicle in a safe place, and
check the engine after it has cooled
completely. (

P.540)
Using the “ODO TRIP”
switch