Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 501 / 600

498
7-3. Do-it-yourself maintenance
12
Reconnect the connectors of the
mirror.
13
Align the tabs, and secure the
mirror by pushing in each diago-
nally-opposite pair of tabs in
order.
Make sure to insert the tabs in order as
shown in the illustration, and push them
in until a click is heard.
If you do not hear the click, do not force
the tabs in. Instead, remove the mirror
and check that the tabs are aligned.
WARNING
■
Replacing light bulb
● Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
●
Do not touch the glass portion of
the light bulb with bare hands.
When it is unavoidable to hold the
glass portion, use and hold with a
clean dry cloth to avoid getting
moisture and oils on the bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
● Fully install light bulb and any parts
used to secure it. Failure to do so
may result in heat damage, fire, or
water entering the light unit. This
may damage the light or cause con-
densation to build up on the lens.
●
Do not attempt to repair or disas-
semble light bulbs, connectors,
electric circuits or component parts.
Doing so may result in death or
serious injury due to electric shock.
■
To prevent damage or fire
●
Make sure bulb is fully seated and
locked.
●
Check the wattage of the bulb
before installing to prevent heat
damage.