Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 194 / 600

191
4
4-2. Opening, closing and locking the doors
Bef
or
e dr
iv
ing
4-2.Opening, closing and locking the doors
■
Using the entry function
Carry the electronic key to enable
this function.
1
Grip the front door handle to
unlock the doors.
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
2
Touch the lock sensor (the
indentation on the upper part of
the door handle) to lock the
doors.
Check that the door is securely locked.
■
Using the wireless remote
control
1
Locks all the doors
Check that the door is securely locked.
Press and hold to close the side win-
dows.
*
2
Unlocks all the doors
Press and hold to open the side win-
dows.
*
*
: These settings must be customized
at a SUZUKI dealer or a qualified
workshop.
■
Switching the door unlock function
It is possible to set which doors the entry
function unlocks using the wireless
remote control. Operate the switching
operation in the vehicle or within approx-
imately 1 m (3.2 ft.) of the vehicle.
1
Turn the power switch to OFF.
2
Cancel the intrusion sensor and tilt
sensor of the alarm system to pre-
vent unintended triggering of the
alarm while changing the settings.
(

P.74)
3
When the indicator light on the key
surface is not on, press and hold
or for approximately
5 seconds while pressing and hold-
ing .
The setting changes each time an oper-
ation is performed, as shown below.
(When changing the setting continu-
Side doors
The vehicle can be locked and
unlocked using the entry func-
tion, wireless remote control,
door lock switches or inside
lock buttons.
Charging port lid and charging
connector will also be locked and
unlocked. (

P.114)
Unlocking and locking the
doors from the outside