Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 491 / 600

488
7-3. Do-it-yourself maintenance

Type C
Normal fuse
Blown fuse
■ After a fuse is replaced
● When installing the lid, make sure that
the tab is installed securely.
● If the lights do not turn on even after
the fuse has been replaced, a bulb
may need replacement. (

P.489)
● If the replaced fuse blows again, have
the vehicle inspected by a SUZUKI
dealer or a qualified workshop.
■
If there is an overload in a circuit
The fuses are designed to blow, protect-
ing the wiring harness from damage.
■
When replacing an electronic com-
ponent, such as a lights, etc.
Suzuki recommends that you use genu-
ine Suzuki products designed for this
vehicle. Because certain bulbs are con-
nected to circuits designed to prevent
overload, non-genuine parts or parts not
designed for this vehicle may be unus-
able.
A
B
WARNING
■
To prevent system breakdowns
and vehicle fire
Observe the following precautions.
Failure to do so may cause damage
to the vehicle, and possibly a fire or
injury.
●
Never use a fuse of a higher
amperage rating than that indi-
cated, or use any other object in
place of a fuse.
●
Always use a genuine Suzuki fuse
or equivalent.
Never replace a fuse with a wire,
even as a temporary fix.
●
Do not modify the fuses or fuse
boxes.
NOTICE
■ Before replacing fuses
Have the cause of electrical overload
determined and repaired by a
SUZUKI dealer or a qualified work-
shop as soon as possible.
■ To prevent damage to the engine
compartment fuse box cover
When opening the fuse box, com-
pletely release the claw locks before
lifting up the cover. Otherwise, the
claws may be damaged.