Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 339 / 600

336
5-5. Using the driving support systems
■
Automatic turn-off of RSA sign dis-
play
One or more signs automatically turn off
in the following situations.
● No sign has been recognized for a
certain distance.
● The road changes due to a left or right
turn, etc.
■
Conditions in which the function
may not operate or detect correctly
In the following situations, RSA does not
operate normally and may not recognize
signs, display the incorrect sign, etc.
However, this does not indicate a mal-
function.
● The front camera is misaligned due to
a strong impact being applied to the
sensor, etc.
● Dirt, snow, stickers, etc. are on the
windshield near the front camera.
● In inclement weather such as heavy
rain, fog, snow or sand storms.
● Light from an oncoming vehicle, the
sun, etc. enters the front camera.
● The sign is dirty, faded, tilted or bent.
● The contrast of electronic sign is low.
● All or part of the sign is hidden by the
leaves of a tree, a pole, etc.
● The sign is only visible to the front
camera for a short amount of time.
● The driving scene (turning, lane
change, etc.) is judged incorrectly.
● If a sign not appropriate for the cur-
rently traveled lane, but the sign exists
directly after a freeway branches, or in
an adjacent lane just before merging.
● Stickers are attached to the rear of the
preceding vehicle.
● A sign resembling a system compati-
ble sign is recognized.
● Side road speed signs may be
detected and displayed (if positioned
in sight of the front camera) while the
vehicle is traveling on the main road.
● Roundabout exit road speed signs
may be detected and displayed (if
positioned in sight of the front camera)
while traveling on a roundabout.
●
The front of the vehicle is raised or
lowered due to the carried load.
●
The surrounding brightness is not suf-
ficient or changes suddenly.
●
When a sign intended for trucks, etc.
is recognized.
●
The vehicle is driven in a country with
a different direction of traffic.
●
The speed information displayed on
the meter and on the navigation sys-
tem may be different due to the navi-
gation system using map data.
■ Speed limit sign display
If the power switch was last turned off
while a speed limit sign was displayed
on the multi-information display, the
same sign displays again when the
power switch is turned to ON.
■ If “RSA Malfunction Visit Your
Dealer” is shown
The system may be malfunctioning.
Have the vehicle inspected by a
SUZUKI dealer or a qualified workshop.
■ Customization
Some functions can be customized.
(Customizable features:

P.177)