Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 156 / 600

153
2
2-2. Charging
Pl
ug-in hy
br
id
s
ys
tem
■
If “Charging Stopped Due to Pulled Charging Connector” is shown
*
: Electricity is consumed when operating “Battery Heater” (

P.121), the air condi-
tioning-linked function (

P.136) or Remote Air Conditioning System (

P.413).
■
If “Charging Complete Limited Due to Battery Temp” is shown
Likely cause Correction procedure
Charging connector is removed while
charging
When the charging connector is removed
while charging, charging stops. If you
want to fully charge the hybrid battery
(traction battery), reconnect the charging
connector.
After the hybrid battery (traction battery)
is fully charged, the charging connector
is removed while the hybrid battery (trac-
tion battery) is being recharged again
because electricity-consuming func-
tions
*
have been used and the remaining
charge is now reduced.
Charging connector is not securely con-
nected
Check the connection status of the
charging connector.

When connecting the charging con-
nector, insert the charging connector
securely.

After connecting the charging connec-
tor, check that the charging indicator of
the charging port is turned on.
If charging cannot be carried out, even
though the proper procedures were fol-
lowed, have the vehicle inspected by a
SUZUKI dealer or a qualified workshop.
Charging connector was unlocked while
charging
When the charging connector is
unlocked while charging, charging stops.
To continue charging, reconnect the
charging connector.
Likely cause Correction procedure
Charging was stopped to protect the
hybrid battery (traction battery) as it con-
tinued to remain hot for a certain period
of time. Allow the hybrid battery (traction battery)
to cool down and perform charging again
if the charging amount has not reached
the desired amount.