Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 321 / 600

318
5-5. Using the driving support systems
■
Enabling/disabling the pre-col-
lision system
The pre-collision system can be
enabled/disabled on the screen
(

P.177) of the multi-information
display.
The system is automatically enabled
each time the power switch is turned to
ON.
If the system is disabled, the PCS
warning light will turn on and a
message will be displayed on the
multi-information display.
■
Changing the pre-collision
warning timing
The pre-collision warning timing
can be changed on the screen
(

P.177) of the multi-information
display.
The warning timing setting is retained
when the power switch is turned to
OFF. However, if the pre-collision sys-
tem is disabled and re-enabled, the
operation timing will return to the
default setting (middle).
WARNING
●
When inspecting the vehicle using
a drum tester such as a chassis
dynamometer or speedometer tes-
ter, or when using an on vehicle
wheel balancer
●
When a strong impact is applied to
the front bumper or front grille, due
to an accident or other reasons
●
If the vehicle cannot be driven in a
stable manner, such as when the
vehicle has been in an accident or
is malfunctioning
●
When the vehicle is driven in a
sporty manner or off-road
●
When the tires are not properly
inflated
●
When the tires are very worn
●
When tires of a size other than
specified are installed
●
When tire chains are installed
●
When a compact spare tire or an
emergency tire puncture repair kit is
used
●
If equipment (snow plow, etc.) that
may obstruct the radar sensor or
front camera is temporarily installed
to the vehicle
Changing settings of the
pre-collision system