Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 181 / 600

178
3-1. Instrument cluster
■
Setting procedure
1
Operate or of the meter
control switches and select .
2
Operate or of the meter
control switches and select the
desired item.
• If the function is turned on and
off or the volume, etc. is changed
on the setting screen, the setting
is changed each time is
pressed.
• For functions that allow opera-
tion contents, display contents,
etc., of function to be selected,
the setting screen is displayed by
pressing and holding . When
the setting screen is displayed,
select the setting or desired
value (time, etc.) with .
3
After changing the settings,
press of the meter control
switches.
■
LTA (Lane Tracing Assist)
(

P.323)
Select to set up the following items.
 “Lane Center”
Select to enable/disable the lane cen-
tering function.

“Steering Assist”
Select to enable/disable steering wheel
assistance.
 “Alert”
Select to change each notification
method of the lane departure alert.
 “Sensitivity”
Select to set the lane departure alert
sensitivity.
 “Sway Warning”
Select to enable/disable the vehicle
sway warning.
 “Sway Sensitivity”
Select to set the vehicle sway warning
sensitivity.
■
PCS (Pre-Collision Sys-
tem) (

P.316)
Select to set up the following items.
 PCS on/off
Select to enable/disable the pre-colli-
sion system.
 “Sensitivity”
Select to change the pre-collision warn-
ing timing.
■
BSM (Blind Spot Monitor)
(

P.349)
Select to set up the following items.
 BSM (Blind Spot Monitor) on/off
Select to enable/disable the BSM sys-
tem.
 “Brightness”
Select to switch the brightness of the
outside rear view mirror indicators.
(

P.349)
 “Sensitivity”
Select to change the alert timing for an
approaching vehicle.
■
(Parking assist-sensor)
(

P.369)
Select to set up the following items.

Parking assist-sensor on/off