Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 384 / 600

381
5
5-5. Using the driving support systems
D
riv
ing
■
The Parking Support Brake func-
tion (static object) will operate
when
The function will operate when the
PKSB OFF indicator is not illuminated
(

P.162, 163) and all of the following
conditions are met:
● Hybrid system output restriction con-
trol
• The Parking Support Brake is
enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 2 to 4 m (6 to 13 ft.) away.
• The Parking Support Brake deter-
mines that a stronger-than-normal
brake operation is necessary to avoid
a collision.
● Brake control
• Hybrid system output restriction con-
trol is operating
• The Parking Support Brake deter-
mines that an immediate brake opera-
tion is necessary to avoid a collision.
■ The Parking Support Brake func-
tion (static objects) will stop oper-
ating when
The function will stop operating if any of
the following conditions are met:
●
Hybrid system output restriction con-
trol
• The Parking Support Brake is dis-
abled.
• The system determines that the colli-
sion has become avoidable with nor-
mal brake operation.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from
the vehicle or in the traveling direction
of the vehicle.
●
Brake control
• The Parking Support Brake is dis-
abled.
• Approximately 2 seconds have
elapsed since the vehicle was
stopped by brake control.
• The brake pedal is depressed after
the vehicle is stopped by brake con-
trol.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from
the vehicle or in the traveling direction
of the vehicle.
■ Detection range of the Parking Sup-
port Brake function (static objects)
The detection range of the Parking Sup-
port Brake function (static objects) dif-
fers from the detection range of the
parking assist-sensor. (

P.372) There-
fore, even if the parking assist-sensor
detects an object and provides a warn-
ing, the Parking Support Brake function
(static objects) may not start operating.
■ Objects that the Parking Support
Brake function (static objects) may
not detect
The sensors may not be able to detect
certain objects, such as the following:
WARNING
■
When to disable the Parking Sup-
port Brake
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
possibility of a collision.
●
When inspecting the vehicle using
a chassis roller, chassis dynamo or
free roller
●
When loading the vehicle onto a
boat, truck or other transport vessel
●
If the suspension has been modi-
fied or tires of a size other than
specified are installed
●
If the front of the vehicle is raised or
lowered due to the carried load
●
When equipment that may obstruct
a sensor is installed, such as a tow-
ing eyelet, bumper protector (an
additional trim strip, etc.), bicycle
carrier, or snow plow
●
When using an automatic car wash