Suzuki ACROSS 2020 Series, Owner'S Manual

Page: 388 / 600

385
5
5-5. Using the driving support systems
D
riv
ing
■ The Parking Support Brake func-
tion (rear-crossing vehicles) will
operate when
The function will operate when the
PKSB OFF indicator is not illuminated
(

P.162, 163) and all of the following
conditions are met:
●
Hybrid system output restriction con-
trol
• The Parking Support Brake is
enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• Vehicles are approaching from the
right or left at the rear of the vehicle at
a traveling speed of more than
approximately 8 km/h (5 mph)
• The shift lever is in R.
• The Parking Support Brake deter-
mines that a stronger than normal
brake operation is necessary to avoid
a collision with an approaching vehi-
cle.
●
Brake control
• Hybrid system output restriction con-
trol is operating
• The Parking Support Brake deter-
mines that an emergency brake oper-
ation is necessary to avoid a collision
with an approaching vehicle.
■ The Parking Support Brake func-
tion (rear-crossing vehicles) will
stop operating when
The function will stop operating if any of
the following conditions are met:
●
Hybrid system output restriction con-
trol
• The Parking Support Brake is dis-
abled.
• The collision becomes avoidable with
normal brake operation.
• A vehicle is no longer approaching
from the right or left at the rear of the
vehicle.
●
Brake control
• The Parking Support Brake is dis-
abled.
• Approximately 2 seconds have
elapsed since the vehicle was
stopped by brake control.
• The brake pedal is depressed after
the vehicle is stopped by brake con-
trol.
• A vehicle is no longer approaching
from the right or left at the rear of the
vehicle.
■ Detection area of the Parking Sup-
port Brake function (rear-crossing
vehicles)
The detection area of the Parking Sup-
port Brake function (rear-crossing vehi-
cles) differs from the detection area of
the RCTA function (

P.366). Therefore,
even if the RCTA function detects a
vehicle and provides an alert, the Park-
ing Support Brake function (rear-cross-
ing vehicles) may not start operating.
WARNING
■
To ensure the Parking Support
Brake (rear-crossing vehicles)
can operate properly
Observe the following precautions
regarding the rear radar sensors
(

P.363). Failure to do so may cause
a sensor to not operate properly, and
may cause an accident.
●
Do not modify, disassemble or paint
the sensors.
●
Do not replace a rear radar sensor
with a part other than a genuine
part.
●
Do not damage the rear radar sen-
sors, and always keep the radar
sensors and their surrounding area
on the bumper clean.
●
If the area around a rear radar sen-
sor is subjected to an impact, the
system may not operate properly
due to a sensor malfunction. Have
the vehicle inspected by a SUZUKI
dealer or a qualified workshop.
●
Observe the rear radar sensor han-
dling precautions. (

P.363)