Superscope PSD410 User Manual
- 69 -
Recording
Overdubbing for Practice (Recording
over a Loop)
In this mode, you will identify a section of audio, then
record additional audio over that section until the STOP
button is pressed. Unlike Mode A (Layering Sections of
a Track), the length of the resulting file in this mode is
determined by how long you choose to record over the
repeating loop.
1. Select a track to record over by pressing the TRACK
SELECT button.
2. Press the PLAY/PAUSE button to listen to the track.
3. Press the LOOP button during playback to view the
LOOP setting menu. If you have already set your
Overdub points, simply move the joystick up to turn
Loop playback ON, and proceed to step 6.
4. Press FUNCTION ADJUST #1 (4A) during playback
to set the beginning of your accompaniment loop
(point A).
5. Press FUNCTION ADJUST #2 (4B) during playback to
set the end of your accompaniment loop (point B).
Loop Playback will start at point A automatically.
6. Press the OVERDUB button [6] to enter REC Pause
Mode (Overdub).
7. Adjust the REC Level knobs so that the Record Level
(left and right channels) does not exceed 0 dB as
indicated on the Level meters. (see
Setting Levels
).
Summary of Contents for PSD410
Page 80: ...80 Superscope PSD410 User Manual System Settings Set Time Date See Setting Time Date...
Page 81: ...Superscope PSD410 User Manual 81 Appendix Appendix Main Menu 1 of 2 2 seconds...
Page 83: ...Superscope PSD410 User Manual 83 Appendix Track Select Mode Transition Diagram...
Page 84: ...84 Superscope PSD410 User Manual Appendix Input Select Mode Transition Diagram...