Superscope PSD410 User Manual Download Page 27 | Manualshive

Page: 27 / 90

Superscope PSD410 User Manual Download Page 27

Superscope PSD410 User Manual

- 27 -

Set Up

Removing the Mini SD Card

※

Do not remove the mini SD card during

recording, playback, or editing. It is
recommended that you remove the mini SD
card only after switching off power to avoid
any risk of lost or damaged data.

Safe SD Card Removal

1. Confirm that the PSD410 is not writing to the SD

card (recording or editing).

2. Push the mini SD card further into the unit until the

mini SD card springs outward.

3. Remove the mini SD card.

■

Setting Up

Speakers

Using Headphones or the Built-In

Speaker

When using headphones or the built-in speaker, regulate
volume by turning the PHONES/SPEAKER level knob on
the front panel. The internal speaker will be muted when
headphones are connected.

External Speakers

When using a powered speaker system, (speakers with
built-in amplifiers), please connect the speaker’s LINE
INPUT to the LINE OUT terminal on the right side panel.
The left channel is the white terminal and the right
channel is the red terminal. Use the volume control on
the powered speakers to adjust level.

.

«
...
25
26
27
28
29
...
»

Summary of Contents for PSD410



























































































Reviews:

No comments