Superscope PSD410, User Manual, Page: 31 / 90

Superscope PSD410 User Manual
- 31 -
Set Up
Recording a Solo Performance
Follow the instructions below when recording a voice or
instrument with a single microphone:
1. Insert a microphone into the MIC/LINE input (L/1)
on the side panel. Both XLR type and 1/4 “standard
plug types can be used.
When using a microphone that requires 48V phantom
power, move the PHANTOM switch to the ON position.
2. Push the INPUT SELECT button to display the Input
Source options.
3. Turn the jog wheel to select External MIC and then
press the INPUT SELECT button to exit the screen.
4. Adjust the
MIC / LINE level control (L/1)
to
obtain a suitable recording level. See Setting Levels .
5. From the Input Select Screen, move the joystick to
the right to select Pan Mode.
6. Pan Setting – L/1 Selecting Pan Mode will “center”
the stereo position of the microphone connected to
Input (L/1). When recording a solo performance, it is
most common to place the soloist in the “center” of
the stereo spectrum. To alter the stereo positioning
for Input (L/1), turn FUNCTION ADJUST #2 (4B).