Superscope PSD410, User Manual, Page: 29 / 90

Superscope PSD410 User Manual
- 29 -
Set Up
Adjust the MIC / LINE L & R Level Controls to obtain a
suitable recording level. See Setting Levels , below.
※
When using the AUX input, control input
level with the AUX LEVEL controller on the
right side panel. When using the INST input,
control input level with the Instrument level
controller.
2. Push the INPUT SELECT button to display the Input
Source options.
3. Turn the jog wheel to select "External MIC” and
then press the INPUT SELECT button to exit the
screen. SELECT button to exit the screen.
Setting Levels
As you sing or play your instrument, turn the L/1
and R/2 input-level control knobs clockwise while
observing the display VU meters.
When your performance is at its loudest, the VU meter
should approach 0 dB without lighting OVER.
If the meter consistently lights red, adjust the input-
level control knobs counter clockwise to reduce the
level and avoid distortion. Switching the
REC LEVEL
switch to the LIM (Limiter) setting can protect the
recording from distortion caused by transient peaks.
To disengage the L/1 and R/2 input-level control knobs
and set the recording level automatically, adjust the
REC LEVEL switch to ALC.
If your mics have higher than normal output, try
switching the
MIC ATT switch to ON.