Superscope PSD410, User Manual, Page: 51 / 90

Superscope PSD410 User Manual
- 51 -
Music Practice
Use the following controls during Loop Mode to locate
A and B points.
※
To fine adjust the A point, turn FUNCTION
ADJUST#1 (4A). To fine adjust the B point,
turn FUNCTION ADJUST #2 (4B). Turn
FUNCTION ADJUST #3 (4C) to reposition the
A and B point at the same time.
The A and B points for each track are stored on the SD
card, so the next time you access the selected track, the
same loop points should appear.
Moving the joystick down will switch to normal playback
(LOOP Playback OFF). Moving the joystick up will resume
A-B Repeat playback (LOOP Playback ON).
Delete a Loop Point
1. Push and hold FUNCTION ADJUST #1 (4A) to reset the
A point the beginning of the track (0:00).
2. Push and hold FUNCTION ADJUST #2 (4B) to reset the
B point to the end of the track.
3. Push and hold FUNCTION ADJUST #3 (4C) to reset
both the A and the B point.
Adjusting Tempo, Key, and Fine Tune
Tempo
1. Press the TEMPO/ KEY button to open the Tempo &
Key screen.
2. Turn the jog wheel to adjust Tempo (playback
speed). Press ENTER to reset Tempo to normal speed.
The tempo control function can modify a track’s
tempo (playback speed) between -75% and +50%
(1% intervals) without affecting playback pitch.
Key
1. Turn FUNCTION ADJUST #1 (4A) to modify playback
Key in semitones. Push FUNCTION ADJUST #1 (4A) to
reset Key to normal playback (no Key adjustment). The
Key adjustment range is +/-12 semitones (half steps).