Superscope PSD410, User Manual, Page: 32 / 90

- 32 -
Superscope PSD410 User Manual
Set Up
Internal Built-in Microphones
The PSD410 has a built-in stereo microphone. When
using the built-in microphones, please refer to the
following procedures.
1. Push the INPUT SELECT button to display the Input
Source options.
2. Turn the jog wheel to select Internal MIC and then
press the INPUT SELECT button to exit the screen.
3. Adjust the MIC / LINE L & R Level Controls to
obtain a suitable recording level. See Setting Levels .
4. Move the joystick right or left to select Stereo Mode
or Pan Mode (Stereo mode is the default setting).
5. Set Record Level - For most applications, the Record
Level should be set to the default value of 0dB. Turn
FUNCTION ADJUST #1 (4A) to adjust Record Level.
Press FUNCTION ADJUST #1 (4A) to return Record
Level to 0dB.
※
When using the built-in microphones,
the built-in speaker is muted to prevent
feedback. To prevent the built-in
microphones from picking up the sound
of buttons on the top panel, operate the
PSD410 with the RC450PSD remote control.