Superscope PSD410, User Manual, Page: 23 / 90

Superscope PSD410 User Manual
- 23 -
Set Up
■
Powering On
The PSD410 works with AC power or AA size batteries.
Before using batteries, please refer to
Using Batteries .
※
It is not possible to power the unit ON with
the remote controller when using battery
power.
Using the AC Adapter

Connect the AC Adapter to the DC Jack.
w
Connect the AC Cord to the Input of the AC Adapter.
e
Connect the AC Plug to AC power source.
r
Slide the POWER switch to power on.
r
Using Batteries
Compatible Batteries
The PSD410 works with alkaline batteries and
rechargeable Ni-MH batteries.
※
Manganese batteries are not recommended
due to their low capacity.
1. Remove the battery cover on the back of the
PSD410.
2. Insert eight alkaline AA size or Ni-MH batteries (fully
charged).
3. Close the battery cover.
4. Slide the POWER switch to power on.
Ⓐ
Ⓐ
When inserting batteries always be mindful of polarity
(+/-).
※
During battery operation, an icon is displayed
in the top right corner of the display showing
battery capacity.
See AC/Battery Icons .