Sun Microsystems Netra X4200 M2, Service Manual

Page: 77 / 222

Chapter 3 Maintaining the Netra X4200 M2 Server 63
■
“Removing the Top Cover” on page 33
■
“Removing the PCI Tray and PCI-E Ribbon Cables” on page 34
2. Remove the DIMM/CPU duct.
See “Removing the DIMM/CPU Duct” on page 68 .
3. Remove the system fan assembly.
See “Removing the System Fan Assembly” on page 54 .
4. Loosen the thumbscrew of the LED board and swing the board out to the left
(
FIGURE 3-40
).
FIGURE 3-40
Removing the LED Board From the Chassis
5. Carefully lift the LED board and cable from the cable clips.
6. Disconnect the cable from the LED board (
FIGURE 3-41
).