Sun Microsystems Netra X4200 M2, Service Manual

Page: 53 / 222

Chapter 3 Maintaining the Netra X4200 M2 Server 39
4. Remove the battery by gently pulling the clip away from the battery face and
lifting the battery straight up (
FIGURE 3-11
).
FIGURE 3-11
Removing the Battery
5. Installation is the reverse of this procedure.
Note –
Install the new battery in the holder with the same orientation (polarity) as
the battery that you removed. The positive polarity, marked with a “+” symbol,
should be facing toward the chassis center.
Positive polarity (+)
facing chassis center