Sun Microsystems Netra X4200 M2, Service Manual

Page: 127 / 222

Chapter 3 Maintaining the Netra X4200 M2 Server 113
Closing the Front Bezel
1. To close the bezel, push it up until it clicks securely in place.
FIGURE 3-87
Closing the Front Bezel
Removing Antistatic Measures
1. Remove any antistatic straps or conductors from the server chassis.
2. Remove the antistatic wrist strap from yourself.
Note –
You will be handling the chassis, which is metal, so the wriststrap is no
longer necessary. Additionally, this gives you more freedom of movement for
installing the server into the rack.
3. Lift the server from the antistatic mat and reinstall it into the rack.
See “Installing the Server Chassis in the Rack” on page 114 .
Caution – The server weighs approximately 40 lb (18 kg). Two people are required
to carry the chassis and install it in the rack.