Sun Microsystems Netra X4200 M2, Service Manual

Page: 207 / 222

Appendix E Serial Attached SCSI BIOS Configuration Utility 191
Exit Screen
It is important to exit the SAS BIOS Configuration Utility correctly, because some
changes take effect only when you exit.
From the Adapter List, press the Esc key to exit.
In addition, a similar Exit screen appears when you exit most other screens, and it
can be used to save settings.
FIGURE E-18
shows the Exit screen. Some options on the
Exit screen might be grayed out, indicating that they are not available at this time.
Manage Hot Spare Press Enter to modify the array hot spare configuration. This field is
grayed out under the following conditions:
• The array is inactive.
• The array is at its maximum number of devices.
• Integrated Striping firmware is used. Striped Arrays do not
support Hot Spares, so no modifications can be made to an array
once it is created.
Synchronize Array Press Enter to synchronize the RAID array. This field is grayed out
under the following conditions:
• The array is inactive.
• The array does not need to be resynchronized.
• The adapter’s MPT FW does not support the feature.
• Integrated Striping firmware is used.
Activate Array This field is used to activate a RAID array.
Delete Array This field is used to delete the currently displayed RAID array.
TABLE E-13
Manage Array Screen Field Descriptions (Continued)
Field Description