Sun Microsystems Netra X4200 M2, Service Manual

Page: 198 / 222

182 Netra X4200 M2 Server Service Manual • May 2007
Integrated RAID Configuration and Management
Screens
Integrated RAID configuration and management involves many screens, all of which
are accessed by selecting RAID Properties on the Adapter Properties screen (see
FIGURE E-3
).
■
If no RAID volumes are currently configured, you are asked to create a RAID
volume.
■
If at least one RAID volume is currently configured, you are shown the current
volume(s) for management purposes.
The screens in the RAID configuration and management area are:
■
Select New Array Type
■
Create New Array
■
View Array
■
Manage Array
Select New Array Type Screen
Select the type of array to create, as shown in
FIGURE E-14
.
The two new array type options are described in the text that appears on the screen.
No further explanation is needed.
Threshold Count Link error count threshold values. When a Link Error Count exceeds
a Threshold Count within the Threshold Time (secs), the Fusion-
MPT FW may reduce the link rate.
Threshold Time
(secs) Time, in seconds, over which to apply Threshold Count. When a
Link Error Count exceeds a Threshold Count within the Threshold
Time (secs), the Fusion-MPT FW may reduce the link rate.
Reset Link Error
Counts Press Enter to reset the Link Error Counts for this PHY or all PHYs.
This operation issues a PHY Link Error Reset - SAS IO Unit Control
Request Message.
Note: When you press Enter, the following prompt appears:
Are you sure you want to reset Phy error counts?
Reset error counts for this Phy only
Reset error counts for all Phys
Cancel
TABLE E-10
PHY Properties Screen Field Descriptions (Continued)
Field Description