Stulz CyberRow CW Series, Installation, Operation And Maintenance Manual

Page: 70 / 88

STULZ CyberRow Chilled Water Series Installation, Operation & Maintenance Manual
(
Dec.
, 2013)
4-48
BMS
Address
Modbus
Address
BACnet
Address
Description Default
Read/
Write
30 031 30 Superheat valve A 0 R
31 032 31 Discharge superheat 0 R
32 033 32 Motor current 0 R
33 034 33 Setpoint discharge superheat 35.0 R/W
34 035 34 Setpoint discharge temperature 105.0 R/W
35 036 35 Condensing pressure 0 R
36 037 36 Condensing temperature 0 R
100 101 100 High air temperature alarm limit 80.0 R/W
101 102 101 Low temperature alarm limit 60.0 R/W
102 103 102 High humidity alarm limit 70.0 R/W
103 104 103 Low humidity alarm limit 30.0 R/W
104 105 104 High water temperature limit (EWT1 or EWT2) 60.0 R/W
105 106 105 Low water temperature alarm limit 40.0 R/W
4.9.2 Unsigned Values for HTTP, SNMP / Modbus Holding Registers / Analog Values for BACnet
BMS
Address
Modbus
Address
BACnet
Address
Description Default Direction
1 130 1001 Cooling analog output 0 R
2 131 1002 Middle Fan Speed analog output 0 R
3 132 1003 Rotor speed (Hz) 0 R
4 133 1004 Rotor Speed (rpm) 0 R
5 134 1005 HPC analog output 0 R
6 135 1006 Power+ temperature 0 R
7 136 1007 Frequency 0 R
8 137 1008 Prop humidifi er control output 0 R
9 138 1009 Comp error 7 R/W
10 139 1010 Cooling analog output 0 R
11 140 1011 Upper fan analog control value 0 R
12 141 1012 Lower Fan analog control value 0 R
13 142 1013 Motor Voltage 0 R
14 143 1014 Actual circuit cooling capacity valve A 3 R/W
15 144 1015 Out of envelop timing 0 R
16 145 1016 Packed bit for BMS -alarms 0 R
17 146 1017 Packed bit for BMS -alarms 0 R
18 147 1018 Packed bit for BMS -alarms 0 R
19 148 1019 Packed bit for BMS -sensor fails 0 R
20 149 1020 Packed bit for BMS -sensor fails 0 R
21 150 1021 Packed bit for BMS -digital inputs 0 R
22 151 1022 Packed bit for BMS -digital inputs 0 R
23 152 1023 Packed bit for BMS -digital outputs 0 R
24 155 1025 Packed bit for BMS -digital outputs 0 R
25 156 1026
Envelope status (0=OK;1=Max.compr.ratio; 2=Max.
disch.P.;3=Curr.limit; 4=Max.suct.P.;5=Min.compr.ratio;
6=Min.DeltaP;7=Min.disch.P.; 8=Min.suct.P.)
0 R
BMS Parameters, Version 1.3 (cont.)