CHAPTER 3
23
C H A P T E R 3 . 0
V600 - PROGRAM MENU (SYSTEM SETUP)
3.1
ENTERING THE PROGRAM MENU
The V600 meter program menu enables the user to:
•
Configure System
- Selects user configuration fields, allowing system flexibility and customizing
of the configuration items listed:, (Section 3.2)
•
Weight Mode (Conf: Wt. Mode) -
Configures the weight mode, either Gross, Net, or
Pickup/Delivery, (Section 3.2.1).
•
Display Code (Conf: Disp Code)
- Configures the program code, telling the meter what
channels and combination of channels to display, (Section 3.2.2).
•
Set Point (Conf: Set Points)
- Configures the set points, (Section 3.2.3)
•
Cycle Time (Conf: Cycle Time)
- Configures the channel cycle time, (Section 3.2.4).
•
RS 232 Port (Conf: RS232 Port)
- Configures the data format of the RS 232
communications port, (Section 3.2.5).
•
Print Headers (Conf: Print Hdrs)
- Configures customized print headings used when
printing weight tickets, (Section 3.2.6).
•
Date (Conf: Date)
- Configures the current date, (Section 3.2.7).
•
Time (Conf: Time)
- Configures the current time, (Section 3.2.8).
•
Scale ID (Conf: Scale ID)
- Configures the scale or truck ID associated with currently
used V600 system, (Section 3.2.9).
•
Lock (Conf: Lock)
- Configures the Setup / Calibration Lock. The lock must be in the
Off
position to adjust the Tare or Calibration settings for the scale. Turning the lock to the
On
position will prevent changes to the system’s calibration, (Section 3.2.10).
•
Setup / Calibration
- Selects the system setup and calibration (Section 3.3), items listed:,
(Section 3.3)
•
Tare Weight (Set: Tare Weight)
- Sets the desired tare weight (Empty Weight) of each
active channel, (Section 3.3.1).
•
Cal Number (Set: Cal Number)
- Sets the calibration number for each active channel,
(Section 3.3.2).
•
Full Weight (Set: Full Weight)
- Sets the projected full, calibrated weight for each active
channel, (Section 3.3.3).
•
Post Cal (Set: Post Cal)
- Sets the system calibration after the load is emptied for each
active channel, (Section 3.3.4).
•
Grad Size (Set: Grad Size)
- Sets the graduation for displaying weight, (Section 3.3.5).
•
Units (Set: Units)
- Sets the units of measure, either pounds or kilograms, (Section 3.3.6).
•
Auto Zero Tracking (Set: AZT Range)
- Sets the auto zero tracking range for each active
channel, (Section 3.3.7)
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006
