62
CHAPTER 3
Press either the
UP
or
DOWN ARROW
buttons to display the next load cell. The
smaller alpha-numeric display will indicate which channel and display the next
load cell being monitored.
Repeat the above steps until all of the channel and load cells have been tested.
Note:
Standard
Vulcoders do not have this capability, therefore the meter will display an
ERROR
on the large display
and the smaller alpha numeric display will display which channel is being monitored and see manual.
For example,
Ch A SEE MANUAL
will be displayed if Channel A Vulcoder is of the older design.
Press the
CYCLE
button to advance to a different channel.
3.6 EXITING THE PROGRAM MENU
To Exit the Meter Program Menu:
Press the
PWR / MENU
button once to exit from the Program Main Menu at any time to
return to the normal operating mode.
Note:
If the
PWR / MENU
button is held too long the meter will display all 8’s and the meter will
turn off.
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006