CHAPTER 4
69
Press the
CYCLE
button to advance to the next channel. If changing the Tare Number using
the either the
UP or DOWN ARROW
buttons, the meter will now ask to save either:
<YES>
or
<NO>
.
Press either
UP
or
DOWN
ARROW
buttons to change to either the
YES
or the
NO
selection. If
YES
is selected, the meter
will
store the new Tare Weight. If
NO
is
selected,
the
meter
will not
store the new Tare Weight.
Press the
ENTER
button to enter the
YES
or
NO
selection. The meter will now display the
next designated channel to set the Tare Weight.
Note:
If the
ENTER
button is pressed after adjusting the Tare Weight and before pressing the
CYCLE
button, the adjusted Tare Weight for that particular channel will be stored and the meter will
return to the
SET: TARE WEIGHT
Menu option.
Repeat the previous steps until each active channel, up to 2 channels, has the Tare Weight set.
Once the last Tare Weight has been adjusted, press the
ENTER
button to save the new Tare
Weight and return to the
SET: TARE WEIGHT
Menu option.
To Exit The SET: TARE WEIGHT Menu:
Press the
PWR / MENU
button once to exit the
Setup / Calibrate
Menu and return to the
Program Main Menu. Press the
PWR / MENU
button twice to go directly to the normal
operating mode.
Note:
Pressing the
PWR / MENU
button before pressing the
ENTER
button will cancel that configuration change.
Note:
If the
PWR / MENU
button is held too long the meter will display all 8’s and the meter will
turn off.
4.3
PROCEDURE FOR ENTERING STARTING
CALIBRATION
NUMBERS
To properly calibrate a V600 system all channels in use need to be calibrated. Listed below is a
procedure for entering the starting calibration numbers. The starting calibration numbers must be
entered for each channel.
Look up Cal Numbers for all active channels in Section 7.1.
Starting Channel A Cal Number:
Starting Channel B Cal Number:
Starting Channel C Cal Number:
Starting Channel D Cal Number:
Starting Channel E Cal Number:
Starting Channel F Cal Number:
Enter the
SETUP / CALIBRATION
Menu, (Section 3.3).
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006
