CHAPTER 4
71
To Exit The SET: CAL NUMBER Menu:
Press the
PWR / MENU
button once to exit the
Setup / Calibrate
Menu and return to the
Program Main Menu. Press the
PWR / MENU
button twice to go directly to the normal
operating mode.
Note:
Pressing the
PWR / MENU
button before pressing the
ENTER
button will cancel that configuration change.
Note:
If the
PWR / MENU
button is held too long the meter will display all 8’s and the meter will
turn off.
4.4
FINE TUNING THE CALIBRATION NUMBER
FOR GROSS VEHICLE WEIGHT METHOD WHEN
ONLY ONE CHANNEL PER TRUCK OR TRAILER IS USED
Figure 4-A: Calibration G.V.W. - One Channel Used
To properly calibrate a V600 system, all channels used need to be calibrated. Adjusting the Cal
Number or Cal Weight adjusts the system sensitivity as compared to a certified platform scale. The
Cal Number is a reference number that is used to help the user keep track of the system calibration.
The
Cal Weight Menu
displays the full weight for a particular channel and is used to aid the user in
properly adjusting the system calibration. This feature however,
can not
be used in all applications
because of certain system configurations. At least
500 lb
of weight must be applied to the specific
channel before the
Cal Weight
function is operable. Listed is a calibration procedure for the Gross
Vehicle Weight Method.
Note:
Each channel in use must be properly calibrated (Ex: A, B, C, and D).
If additional assistance is needed to fine tune your scale system, please follow the instructions shown
in Section 7.3 “ Assistance in Fine Tuning Your Scale System.”
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006