6
V600 BASIC REFUSE SYSTEM SETUP
V600 BASIC REFUSE SYSTEM SETUP
1. Enter the Program Menu by pressing the
PWR/MENU
button after the meter has finished its start up routine, Section 3.1.
2.
Configure System
will be displayed on the smaller display. Press the
ENTER
button to enter the
Configure System
Menu, Section 3.2.
3. Configure
the
Weight Mode: Press the
ENTER
button to select the
CONF: WT. MODE
Menu. Most users will set the weight mode to the
Pickup/Deliver Mode by pressing the
UP
or
DOWN ARROW
buttons until
[P/D]
is displayed. Press the
ENTER
button to save the desired
selection. See Section 3.2.1 for more details.
4. Set the vehicle Tare Weight: Press the
PWR/MENU
button to return to the
Configure System
Menu. Press the
CYCLE
button to advance to the
Setup/Calibrate
Menu. Press the
ENTER
button to enter the
Setup/Calibrate
Menu. Press the
ENTER
button to select the
SET: TARE
WEIGHT
Menu. Press either the
UP or DOWN ARROW
buttons to adjust the number to the desired Tare Weight. Most users will set the Tare
Weight to zero to monitor net payload. Press the
ENTER
button to save the desired Tare Weight. See Section 3.3.1 for more details.
5. Set the Grad Size: Press the
CYCLE
button to advance to the
SET: GRAD SIZE
Menu is displayed. Press the
ENTER
button to enter the
SET:
GRAD SIZE
Menu. Press either the
UP or DOWN ARROW
buttons to adjust the desired Grad Size. Most users find that leaving the Grad Size
set to 50 works well without being too sensitive. Press the
ENTER
button to save the desired Grad Size. See section 3.3.5 for more details.
6. Set the Auto Zero Tracking Range to Zero: Press the
CYCLE
button to advance to the
SET: AZT RANGE
Menu. Press the
ENTER
button to
enter the
SET: AZT RANGE
Menu. Press either the
UP or DOWN ARROW
buttons to adjust the AZT Range to zero. Press the
ENTER
button
to save the desired AZT Range. See section 3.3.7 for more details.
7. Exit the Program Menu: Press the
PWR/MENU
button until the display returns to the normal operating mode. See section 3.6 for more details.
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006