CHAPTER 3
51
3.3.5
SETTING THE GRAD SIZE
The grad or graduation size for the V600 meter allows the meter to display the weight in either 10, 20,
50, 100, or 200 lb or kg increments. The procedure to change the grad size is listed below.
Procedure to Set the Grad Size:
Enter the
SETUP / CALIBRATE
Menu, (Section 3.3).
Press the
CYCLE
button until
SET: GRAD SIZE
is displayed.
Press the
ENTER
button to select the
SET: GRAD SIZE
option.
Press either the
UP
or
DOWN ARROW
buttons to select the desired the Grad Size.
The Grad Size settings are: 10, 20, 50, 100, and 200.
Press the
ENTER
button to store the grad size selected and return to the
SET: GRAD SIZE
Menu option.
Press the
CYCLE
button to advance to the next
SETUP / CALIBRATE
Menu option.
3.3.6
SETTING THE UNITS (LB OR KG)
The V600 meter allows the user to display the weight in either pounds or kilograms. The LED
illuminated by either pounds or kilograms, shows the unit of measurement selected. To change the
unit of measurement, refer to the procedure below.
Procedure To Set The Units (Lb or Kg):
Enter the
SETUP / CALIBRATE
Menu, (Section 3.3).
Press the
CYCLE
button until
SET: UNITS
is displayed.
June 21, 2006
VULCAN ON-BOARD SCALES 1-800-237-0022
Doc. 44-10032-001 Rev. C
©
STRESS-TEK, INC. 2006