252
www.stiebel-eltron.CoM
SpEcIal accESSorIES wwk 300..Sol
Air duct connection
for wwK 300 ... sol
Type
Air duct connection
Part no.
07 14 48
Technical description:
the air duct connection is the adaptor between commercially available air ducts or hoses
with a standard diameter of 200 mm and the air grille of the heat pump on the air inlet
and the air discharge side. For wall openings, use the air duct connection as union
between the wall and the air duct.
– Air inlet side
– Air discharge side of the wwK
– optional wall connection
Air duct connection for commercially available air ducts or flexible pipes with 200 mm Ø.
Max. possible length Ø 200 mm = 8 m
Condensate pump
only required for the internal installation of the wPl without bottom
drain
Type
PK 10
Part no.
22 92 86
Specification
Voltage / frequency
V/Hz 1/Pe ~ 230 V 50 Hz
Pump rate
l/h 500
Pump head
m 5.4
Power consumption
VA 90
Height
mm 170
width
mm 195
Depth
mm 130
weight
kg 2.0
Technical description:
Float switch-controlled pump for pumping condensate with hose connection, fully wired,
ready to plug in.
Summary of Contents for Heat pumps
