STIEBEL ELTRON Heat pumps, Technical Manual

Page: 196 / 260

196 www.stiebel-eltron.CoM
bUffEr cylIndEr Sbp 200 E, Sbp 200 E cool
Buffer cylinder 200 litres for heating heat pumps
Type SBP 200 E SBP 200 E cool
Part no. 18 54 58 22 75 90
Specification
Max. operating pressure bar 3 3
test pressure bar 4 4
water capacity l 200 200
Connector inches G 2" (male) G 2" (male)
Female connection for booster heater inches G 1½" G 1½"
Female connection for ventilation inches r ¾" r ¾"
Female connection with protective pipe inches G ½" G ½"
Weight and dimensions
Height mm 1550 1550
Diameter incl. thermal insulation mm 630 630
thermal insulation thickness mm 90 90
Height when tilted mm 1650 1650
weight kg 56 58
Technical description SBP 200 E:
Cylinder for hydraulic separation of the heat pump and heating circuit flow. it is designed
to provide system separation, to extend the heat pump runtimes and, to an extent, to
bridge power-oFF periods. the 90 mm thermal insulation, as directly applied PU foam
insulation, ensures especially low heat losses and is protected with an easy care plastic
jacket. A sensor well is provided for connecting the sensor.
Technical description SBP 200 E cool
Cylinder for hydraulic separation of the heat pump and heating/cooling circuit flow. it
is designed to provide system separation, to extend the heat pump runtimes and, to an
extent, to bridge power-oFF periods. Diffusion-proof complete foam application ensures
suitability for cooling applications. the 90 mm thermal insulation, as directly applied PU
foam insulation, ensures especially low heat losses and is protected with an easy care
plastic jacket. A sensor well is provided for connecting the sensor.
Buffer cylinder SBP 200 E (cool)
Position list
1 Connector G 2"
Heating flow
2 Connector G 2"
Heat pump flow
3 Connector G 2"
Heating return
4 Connector G 2"
Heat pump return
5 Connector G½"
with sensor well
6 Connector G1½"
for bGC
7 Connector r¾"
for air vent valve