manualshive.com logo in svg

STIEBEL ELTRON Heat pumps, Technical Manual

Share
Download
STIEBEL ELTRON Heat pumps Technical Manual Download Page 36

36

www.stiebel-eltron.CoM

dHw HEatIng wItH HEat pUmpS

DHW heating with heat pumps

DHw heating is possible with all 
stiebel eltron heat pumps. the 
wide range of applications and the 
many options of combining heat 
pumps with cylinders of different 
sizes and equipment levels require 
engineering and installation 
documents, that are matched to 
each individual application. the 
connections on the electrical and 
water side of the heat pump are 
therefore made in line with the 
stiebel eltron technical guides.

DHW cylinders

the size of the DHw cylinder is 
subject to the daily and the peak 
consumption, the DHw distribution 
system and the installed draw-off 
points. Apartment buildings and 
non-residential buildings are sized 
in accordance with the consumption 
profiles and guidelines appertaining 
the hygiene requirements. the 
cylinder is heated via an internal or 
external indirect coil.

Indirect coils

the minor temperature differentials 
lend themselves best to DHw heating 
by heat pump with internal indirect 
coils with at least 0.25 m² exchanger 
surface per kw output.
A further option is DHw heating via an 
external indirect coil. when sized in 
this way, a DHw temperature of  
approx. +50 °C is reached. if higher 
temperatures are required, provide 
DHw backup heating with an electric 
booster heater. 

Control

the DHw heating is regulated by the 
wPM heat pump manager.

DHW heating with an external heat exchanger
Small systems according to DVGW W 551

DHW heating with DHW cylinder SBB 300 WP
Small systems according to DVGW W 551

DHW heating with a SBS ... combi cylinder W.
Small systems according to DVGW W 551

Summary of Contents for Heat pumps





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands