manualshive.com logo in svg

STIEBEL ELTRON Heat pumps, Technical Manual

Share
Download
STIEBEL ELTRON Heat pumps Technical Manual Download Page 152

152

www.stiebel-eltron.CoM

brInE | watEr HEat pUmpS wpf 20/27/40/52/66

A

t a glance

  For fully automatic heating 

water heating up to +60 °C flow 
temperature

  inlet temperature range for the 

wPF

 

brine temp. –5 °C to +20 °C

  Comprises all components 

required for its function and 
safety

  sound-insulated construction and 

sound attenuating materials in 
the casing components

  Corrosion-protected through zinc-

plated or stove enamelled casing 
components

  Central control of the heating 

system and safety functions 
through the heat pump manager 
wPMw ii

  test symbol of independent test 

bodies (see type plate)

  Contains HCFC and CFC-free 

r410A refrigerant

  Can be operated with heating 

return water up to +75 °C (dual-
mode operation)

Appliance description

brine | water heat pump as standard 
appliance for internal installation. 
A cascade comprising heat pumps 
positioned next to or above each 
other is feasible. the heat pump drive 
unit is equipped with an hermetically 
sealed compressor, condenser, 
evaporator, safety equipment such 
as a high/low pressure limiter, and 
a frost protection facility. the heat 
pump is filled with HCFC and CFC-
free refrigerant r410A.

Function

environmental energy is extracted 
by the heat exchanger on the heat 
source side (evaporator). Any energy 
extracted is transferred, together with 
the energy drawn by the compressor 
drive, to the heating water by a heat 
exchanger on the heating water 
side (condenser). subject to the 
heating load, the heating water can 
be heated to b15 °C and 
+60 °C. the correct and professional 
implementation of the heat source 
system is a must for a perfect 
operation. For this, observe the heat 
pump cooling load.

Sets

when the heating output of the 
largest heat pump becomes 
insufficient, two or more additional 
heat pumps are controlled as one.

Safety and quality

Summary of Contents for Heat pumps





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands