STIEBEL ELTRON Heat pumps, Technical Manual

Page: 198 / 260

198 www.stiebel-eltron.CoM
bUffEr cylIndEr Sbp 700 E, Sbp 700 E Sol
Buffer cylinder 700 litres for heating heat pumps
Type SBP 700 E SBP 700 E SOL
Part no. 18 54 59 18 54 60
Specification
Max. operating pressure bar 3 3
test pressure bar 4 4
water capacity l 700 700
Connector inches G 2" (male) G 2" (male)
Female connection for booster heater inches G 1½" G 1½"
Female connection for air vent valve inches r ¾" r ¾"
Female connection with protective pipe inches G ½" G ½"
indirect coil connections inches – G 1"
indirect coil surface area m² – 2.0
Weight and dimensions
Height mm 1890 1890
Diameter incl. thermal insulation mm 910 910
thermal insulation thickness mm 80 80
Height when tilted mm 2000 2000
weight kg 145 176
Technical description SBP 700 E:
Cylinder for hydraulic separation of the heat pump and heating circuit flow. it is designed
to provide system separation, to extend the heat pump runtimes and, to an extent, to
bridge power-oFF periods. the 80 mm thermal insulation, as directly applied PU foam
insulation, ensures especially low heat losses and is protected with an easy care plastic
jacket. A sensor well is provided for connecting the lower sensor. the thermal insulation
can be removed from the sides to enable the transportation of the cylinder through
doorways as narrow as 770 mm.
Technical description SBP 700 E SOL:
Cylinder for the hydraulic separation of the heat pump and heating circuit flow, with an
additional smooth tube indirect coil for connecting, for example, solar thermal systems
into conventional heating systems. it is designed to provide system separation, to extend
the heat pump runtimes and, to an extent, to bridge power-oFF periods. the 80 mm
thermal insulation, as directly applied PU foam insulation, ensures especially low heat
losses and is protected with an easy care plastic jacket. the thermal insulation can be
removed from the sides to enable the transportation of the cylinder through doorways as
narrow as 770 mm. A sensor well is provided for connecting the lower sensor.
Buffer cylinder SBP 700 E / SOL
Position list
1 Connector G 2"
Heating flow
2 Connector G 2"
Heat pump flow
3 Connector G 2"
Heating return
4 Connector G 2"
Heat pump return
5 Connector G½"
with sensor well
6 Connector G1½"
for bGC
7 Connector r¾"
for air vent valve
8 Connector G1½"
Heat exchanger flow
9 Connector G1½"
Heat exchanger return
Dimensions in mm